in ,

[SHOT 2018] DSG Arms – RANGER RACK And New Holsters

This article was originally posted on Thefirearmblog.com

Named after the legendary Texas Rangers, the DSG Arms Ranger Rack was developed to support vehicle-based law enforcement operations manage available gear under stress. As with most officers, spare magazines are usually spread out between a duty bag and swimming around in vehicle door pockets. The problem with this setup is that in the event of an active shooter, vehicle operation or intense response to an ongoing threat, hunting for a spare mag can take valuable seconds away from the fight. DSG developed the Ranger Rack to securely hold reloads on the outside of a door pocket. As an added bonus, the whole kit can be easily relocated to a go bag, or individual carriers easily removed to a belt or pocket. The Ranger Rack starts at $49 with full kits priced at $139.

DSGArms also has a new addition to their popular holster lineup. Nicknamed the D4 since it has not been given an official designation, DSG has updated their quality Kydex solutions to accept a variety of different mounting options from various manufacturers. Additional details and specifications are being finalized, so check back at the DSGArms website for details in the near future.

And last but not least, if you haven’t had a chance to check out DSG’s in-house brand of AR15 barrels and upper receiver groups, you are missing out. Affordably priced, DSG has a wide variety of options a calibers available – including 6.5 Creedmoor.

Additional specifications and details can be found below.

DSGArms Ranger Rack Kit

Kit includes:

  • 1 Ranger Rack
  • 2 CDC AR15 / M4 Magazine Carriers
  • 2 CDC 9 / 40 Double Stack Magazine Carriers
  • Does NOT come with magazines

Introducing the DSG Ranger Rack Kit – a dedicated storage rack for back-up pistol and/or rifle magazine carriers designed to fit into your daily driver’s door side pocket.

Purpose: Rapid Vehicle Reload OR Grab and Go. . . Constructed of hefty 0.187 Kydex, the Ranger Rack utilizes DSG pistol and rifle magazine carriers which clip onto the rack, allowing the driver to reload off the rack, or shift the occupied mag carriers from the rack onto a belt as needed. Use the included hardware pack to lock in your preferred magazine carrier arrangement to prevent shifting on the rack.

Location: Your Choice. . . Using the attachment clips you can drop the Ranger Rack inside your vehicle side pocket, or reverse the Ranger Rack so that it sits outside the side pocket. The attachment clips come with pre-drilled threaded holes for permanent attachment to the side pocket if desired.

Vehicle Fit Statement: The Ranger Rack is a “universal” fit item and we encourage customization for your specific application! The accompanying hardware pack includes additional rubber spacers in order to get the Ranger Rack to fit to varying door panel thicknesses.

Law Enforcement: The full-size Ranger Rack has been tested for compatibility with these common fleet vehicles.

  • Dodge Charger
  • Ford Crown Victoria
  • Ford Explorer
  • GM trucks late model/full size

Features:

  • Material: 0.187 Kydex
  • Color: Black
  • Dimensions: 12”W x 2”H
  • Attachments: Height-adjustable, pre-drilled threaded clips
  • Hardware pack included additional screws and various sizes of rubber spacers

CDC Compact Discreet Carry Magazine Carriers:

DSG Holsters Pistol and Rifle Magazine Carriers are carefully molded from the same durable Kydex 100 used for our holsters and retain magazines inserted either direction. The rubber-mounted injection molded 1.5” belt clips make these magazine carriers functional for inside or outside waistband wear, and the user may adjust retention to suit their activities – whether concealed carry, training or competitive shooting.

DSGArms Match-6.5 Creedmoor Barrels

  • 6.5 Creedmoor
  • 416R Stainless Steel
  • Bead-blasted external finish
  • Nickel Boron coated barrel extension
  • 1:8 Twist Rate
  • 5/8×24 Muzzle Threads
  • HP & MPI Tested
  • .875” Gas Block Seat
  • Weight: 76oz
  • Heavy profile
  • 11 Degree recessed target crown
  • Button Rifled
  • Rifle-length gas system
  • $295

DSG Complete 11.5″ .223 Wylde Match Grade Upper w/ 10″ BCM M-LOK Rail

Complete Upper Features:

Upper is Mil-Spec upper receiver with M4 feed ramps. CNC Machined of 7075-T6 Aluminum, Type III Hard Coat Anodized. Barrel is 416R Stainless steel with 1:8 twist, 11.5″ government profile with .223 Wylde chamber, button rifled, MP & HPI tested, carbine length gas system, Nickel Boron coated barrel extension, 11 degree target crown with A2 flash suppressor and crush washer. Barrel has been dimpled to ensure gas block does not move. BCG is M16 Profile, MPI Magnetic Particle Inspected tested, 9310 steel bolt with extra power extractor spring with black insert, properly staked gas key, black nitride coated.

Each DSG upper is test-fired and guaranteed to shoot 1 MOA with factory match ammunition at 100 yards based on a three-shot group. The matched BCG used for the test-fire is included in the box with the upper.

BCM M-LOK Rail:

  • The MCMR Series of handguards gives the shooter modularity in the M-LOK® platform.
  • MCMR features M-LOK® Compatible mounting system.
  • Free Float Handguard eliminates loads from barrel, reducing the deflection for more accurate shooting.
  • Precision Machined Aerospace 6061-T6 Aluminum Alloy, for high strength and lightweight.
  • Proprietary engineered profile offers additional cross sectional strength.
  • Steel Barrel Nut same KMR, MCMR, and QRF series, to resist movement under heat.
  • Hard Coat Anodized per Mil-A-8625F, Type III, Class 2
  • Handguard alone weighs 6.6 oz
  • Handguard mounting hardware 2.3 oz
  • 1.3” Inside Diameter
  • 1.5″ Wide

[SHOT 2018] Vortex Optics Crossfire – Strike Eagle – Viper HD

[SHOT 2018] Blue Force Gear – Tracer Pack And Micro Trauma Kit